The common methods of unlocking a marble lock are as follows: 1. Hit the key, insert the corresponding tool at the place where the marble is lowered, and hit it upward with force. At this time, the lower marble will hit the marble, causing separation between the two; First, use the wrench to rotate the lock cylinder, and cooperate with the needle-shaped unlocker to push the marble upwards. When the marble reaches the highest point, it will deflect a little, and then twist the wrench to open the lock.
It is relatively simple to use this method, and even if you do not have special training, you can easily open the ordinary marble lock. First, prepare a tool, insert the tool into the place where the marble is placed, and then hit it hard. When the marble is thrown upward, the marble lock can be unlocked in an instant. In order to prevent the lock from being easily opened, manufacturers now have another lock cylinder in the production of ordinary marble locks, which can ensure safety.
2. Unlocker and wrench
First find the lock cylinder of the marble lock, and then rotate the lock cylinder with the torque wrench. Under the action of external force, the lock spring and the marble will be pushed up. When the marble is pushed to a certain height, the lock cylinder will be slightly biased. Of course, if there is a slight offset, the marbles cannot be fully opened. When the heights of the marbles are all aligned, the marble locks can be easily opened with a torque wrench. In order to reduce the unlocking time, a lot of force is required when pushing up.
3. How to choose a marble lock
4. When buying an electronic lock, you can look at the tooth flower on the key. In fact, it is similar to human teeth. If there are more teeth, and the teeth are deeper and the arrangement order is more complicated, the higher the safety factor, the higher the anti-theft performance. The more superior it is, it cannot be opened at will by corresponding tools.
5. When buying a marble lock, you should look at the appearance of the lock. If the color is uniform, the outer plating treatment is superior, and it is smooth and flat, which means that the product quality is guaranteed. If the color of the marble lock is dark yellow, the cable core is generally stronger, and the harder the lock core, the better the anti-theft performance. If the color of the marble lock is gray and white, it means that the lock cylinder may be zinc alloy, which means that the anti-theft performance is average and the safety factor is not very high.
5. When buying an electronic lock, you can test it on the spot, insert the key into the lock, and see how the lock cylinder feels when it is used. If the lock cylinder is stuck during use, it means that the quality of the marble lock is average, and it is not recommended for everyone Buy.
Andja produces excellent quality locks, And we accept customization. For more information about Andja's products, contact your Andja representative or call 18962195537